CGXWB - PRO-LINE 430 WHITE SILICONE ALKYD ENAMEL TOPCOAT

  • MSDS: CGXWB
  • Manufacturer: PRO LINE PAINT COMPANY
  • Product Name: PRO-LINE 430 WHITE SILICONE ALKYD ENAMEL TOPCOAT
  • National Stock Number: 8010-01-433-8391
Product Identification

Product ID:PRO-LINE 430 WHITE SILICONE ALKYD ENAMEL TOPCOAT
MSDS Date:06/30/1992
FSC:8010
NIIN:01-433-8391
MSDS Number: CGXWB

Responsible Party
PRO-LINE PAINT COMPANY
2646 MAIN STREET
SAN DIEGO, CA 92113-3613
US

Emergency Phone: 800-535-5053

Info Phone: 619-231-2313 OR 232-8968

Preparer: E. SOETERIK

Cage: 9D157

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

HIGH SOLIDS SILICON

Fraction By Weight: 25.0%


#100 SOLVENT

CAS: 64742-95-6

Fraction By Weight: 7.0%

ACGIH TLV: 100 PPM


VM&P NAPHTHA HI-FLASH

CAS: 64742-89-8

Fraction By Weight: 6.0%

OSHA PEL 500 PPM

ACGIH TLV: 350 PPM


ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 4.0%


METHYL AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 4.0%

OSHA PEL 100 PPM/STEL 100

ACGIH TLV: 50 PPM


MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 1.0%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


COBALT COMPOUNDS (AS CO) (SARA 313)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: <1.0%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 2.0 MG/M3


VOC = 340 G/L

RTECS: 9999999VO

OSHA PEL NOT RELEVANT

ACGIH TLV: NOT RELEVANT

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT, LACRIMATION, REDNESS,
BLURRED VISION. SKIN: IRRIT, REDNESS, DERMATITIS, DEFATTING. INHAL:
NASAL & RESPIRATORY IRRIT, CNS DEPRESSION (DIZZY, DROWSY, WEAKNESS,
FATIGUE, CONFUSION), NAUSEA, H EADACHE, VERTIGO, UNCONSCIOUS,
ASPHYXIATION. INGEST: GI IRRIT, ABDOMINAL PAIN, NAUSEA, VOMIT,
DIARRHEA.

First Aid

First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES, LIFTING LIDS. SKIN: FLUSH
W/WATER. REMOVE CONTAM CLOTHES, WASH BEFORE REUSE. DECONTAM SHOES.
INHAL: GET FRESH AIR, ARTIF RESP IF NEEDED. INGEST: DRINK 1-2
GLASSES WA TER, DONT INDUCE VOMIT. CALL POISON CONTROL CENTER. IN
ALL CASES, GET IMMED MED AID.

Fire Fighting

Flash Point Method:TCC
Flash Point:107F,42C
Lower Limits:7.9
Upper Limits:0.8
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE SCBA W/FULL-FACE PIECE IN POSITIVE
PRESSURE MODE AND FULL PROTECTIVE CLTHES. WATER MAY BE USED TO COOL
CONTAINERS.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS CLOSED. VAPORS ARE >AIR &
TRAVEL TO IGNITS. REMOVE IGNITS. CLOSED CONTAINERS EXPLODE IN HIGH
HEAT. SPECIAL PRECAUTIONS REQUIRED FOR HOT SURFACE.

Accidental Release

Spill Release Procedures:REMOVE IGNITS. ABSORB W/INERT MATERIAL. SHOVEL
RECLAIMED LIQUID & ABOSRBENT INTO SALVAGE DRUMS OR TANK TRUCK FOR
DISPOSAL.

Handling

Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE TO
CONTAINERS & SPILLAGE. STORE IN A COOL, WELL VENTED AREA
W/SPRINKLER SYSTEM. KEEP FROM HEAT. POST NO SMOKING SIGNS.
Other Precautions:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING PROCEDURES
BEFORE THEY WORK WITH THIS PRODUCT.

Exposure Controls

Respiratory Protection:USE DUST/MIST RESPIRATOR (HIGH EFFICIENCY
CARTRIDGE ADVISED). IF SPRAYING/SANDING, USE ORGANIC VAPOR
CARTRIDGE RESPIRATOR IF TLV FOR SOLVENT MAY EXCEED E.G. 8540 3M
CORP NIOSH APPROVED RESPIRATOR. USE AIR-FED HOOD IN CONFINED
AREAS.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:GOGGLES W/SIDE SHIELDS
Other Protective Equipment:USE PROTECTIVE CLOTHES. PROVIDE EMERGENCY
SHOWERS AND EYEWASH STATIONS.
Work Hygienic Practices:CHANGE CONTAM CLOTHES IMMEDIATELY. DONT WEAR
CONTACT LENSES WHEN WORKING W/THIS PRODUCT.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:285 TO 350F
Melt/Freeze Pt:M.P/F.P Text:95 TO 95 KU
Vapor Density:>AIR AIR=1
Spec Gravity:12.50
Evaporation Rate & Reference:SLOWER THAN ETHER(BUAC=1)
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HIGH TEMPS, SHOCK FROM DROPPING.
Hazardous Decomposition Products:DECOMP PRODUCTS MAY CAUSE HEALTH
HAZARDS (SYMPTOMS DELAYED). CARBON DIOXIDE, CARBON MONOXIDE.

Disposal

Waste Disposal Methods:USE METAL CONTAINER MARKED DO NOT REUSE. PUT
MATERIAL IN CONTAINER. USE VERMICULITE OR OTHER INERT ABSORBENT.
KEEP AWAY FROM SEWER. DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.